Crusher Bucket Price for Excavator Recycling Projects

A crusher bucket price should describe a working attachment package, not only the bucket shell. The correct scope depends on the excavator class, hydraulic supply, mounting connection, feed opening, required output size, material condition, wear package, hoses, packing and destination. If two quotations omit different items, their totals cannot be compared as equivalent equipment.

YG crusher buckets are intended to process suitable concrete, demolition material and rock at the work site. The attachment connects to the excavator’s breaker lines and uses a hydraulic motor to drive the crushing mechanism. Before requesting a quotation, the buyer should confirm the carrier data and the material to be processed so YGBC155, YGBC225 or YGBC300 can be matched as a complete model rather than selected from bucket capacity alone.

Continue product selection with the excavator rock crusher bucket, excavator drum cutter, and hydraulic pulverizer when those attachments match the actual task.

Send the excavator, material and destination details for an initial package review.

REVIEW MY CRUSHER BUCKET NEEDS

Crusher bucket feed opening and crushing plates
Front view shows the inlet and crushing chamber used to receive prepared material.
Crusher bucket hydraulic drive and excavator mount
Side view shows the hydraulic drive, hose connections and excavator mounting structure.

Start the Crusher Bucket Price Review with the Excavator

Record the excavator make, model, operating weight, hydraulic pressure, available oil flow, breaker-line connection and coupler dimensions. The three YG models cover different carrier ranges, and the attachment mass also changes with the model. A bucket that is too large affects stability and handling; one that is too small may not accept the planned feed or use the carrier efficiently.

Confirm the real working position as well as the machine specification. Ground bearing, reach, lifting radius, slope, overhead restrictions and the way processed material will be discharged all affect safe operation. Send measured mounting details or the information needed to prepare a suitable bracket. This avoids treating an incompatible coupler as a minor site adjustment after delivery.

Crusher bucket side structure in workshop
Workshop view supports checks of the shell, side plates and mounting points.
Crusher bucket front opening in workshop
Front workshop view helps confirm inlet dimensions and crushing chamber access.

Define Material and Output Size before Comparing Prices

Describe whether the feed is reinforced concrete, plain concrete, brick, demolition debris or natural rock. Include the largest practical piece, expected hardness, moisture, contamination and any steel that must be separated before crushing. The inlet dimension determines what can enter the bucket, but the excavator operator still needs to present manageable pieces and avoid unsuitable material that can jam or damage the mechanism.

State the required discharged size and what will happen to the processed material. Backfill, road base, temporary access and further screening may need different gradations. The YG models list an adjustable 15–120 mm outlet range. Final grading still depends on feed consistency, wear condition and operating method, so a trial with representative material is more useful than choosing the narrowest setting without considering throughput and recirculation.

Share the feed material and required discharged size before comparing models.

CHECK MY MATERIAL MATCH

Compare YG Crusher Bucket Models

Use one complete row when selecting the preliminary model. Carrier class, attachment weight, load volume, pressure, oil flow and opening dimensions must remain linked to the same model. The table provides the core product parameters required for a quotation; mounting details, hoses, wear parts, packing and freight are added based on the actual excavator and destination.

ParameterYGBC155YGBC225YGBC300
Excavator class13–18 t19–30 t31–39 t
Attachment weight2250 kg3300 kg3800 kg
Load volume0.58 m³0.70 m³0.85 m³
Operating pressure200 bar200 bar200 bar
Required oil flow130 L/min150 L/min180 L/min
Inlet opening600 × 500 mm740 × 500 mm900 × 550 mm
Adjustable outlet15–120 mm15–120 mm15–120 mm
Crusher bucket wear plate and reinforced shell
Reinforced shell and wear areas should be included in the maintenance plan.
Crusher bucket mounting frame and hydraulic components
Mounting geometry and hydraulic components must match the selected excavator.

Check What the Crusher Bucket Quotation Includes

Ask the supplier to list the crusher bucket, excavator connection, hydraulic hoses and fittings, motor configuration, replaceable crushing components, tools, manuals, test scope and packing separately. The bucket uses the excavator’s hydraulic system, so the proposal should identify the pressure and oil-flow data used for selection. Optional or site-specific items should not be hidden inside a single unexplained total.

Wear resistance affects operating cost as much as the initial crusher bucket price. The YG design uses a high proportion of wear-resistant plate in the shell, a Hardox front plate and thickened side plates. Request the supplied wear items and the replacement procedure for the selected model. Material abrasiveness, feed size and operating practice determine actual wear, so spares should be planned from the intended job rather than copied from an unrelated project.

List the carrier, mounting and hydraulic package so no required item is omitted.

BUILD MY QUOTATION SCOPE

Plan Loading, Crushing and Discharge at the Job Site

Create a work zone that separates incoming material, oversize reduction, metal removal, crushing, discharged product and truck or loader movement. The excavator needs enough space to load the bucket without dragging it through debris and to discharge without striking barriers or people. A stable feed rhythm is more productive than overfilling the inlet and repeatedly reversing the mechanism.

The reversible drive helps clear a blockage, but it is not a substitute for feed preparation. Stop the operation before inspecting trapped material, relieve hydraulic pressure and follow the equipment procedure. Record unusual vibration, leakage, tooth or plate wear and changes in discharged size. Routine checks protect both the attachment and the excavator hydraulic circuit.

Crusher bucket processing demolition material
Job-site use requires prepared feed, a controlled work zone and planned discharge.
Excavator crusher bucket recycling at job site
The excavator, attachment and material-handling plan must operate as one system.

Prepare a Complete Crusher Bucket Price Request

Send the excavator data, mounting dimensions, hydraulic pressure and flow, material photographs, largest feed size, required output range, expected daily quantity, job-site access, destination and required delivery schedule. Include whether reinforcement or other contaminants are present and how they will be removed before crushing.

Request an itemized proposal for the selected YGBC model, mounting package, hoses and fittings, wear parts, tools, documents, test, packing and freight basis. This creates a comparable quotation and gives the site team a practical preparation list. A useful price request explains the whole operating package instead of asking for a generic crusher bucket price without carrier or material information.

Provide the destination and accessory list for an itemized crusher bucket quotation.

REQUEST A CRUSHER BUCKET QUOTE

Crusher Bucket Price FAQ

What information is needed for a crusher bucket price?

Provide excavator model and hydraulics, mounting data, material, feed size, required output, daily quantity, destination and accessory scope.

Can crusher buckets be selected only by excavator tonnage?

No. Carrier weight is the first filter, but hydraulic flow and pressure, coupler, working radius, material and opening requirements must also match.

What changes the wear-parts requirement?

Material abrasiveness, reinforcement, feed size, output setting, contamination and operating practice affect the wear plan.

Why should freight and mounting items be listed separately?

They vary by excavator and destination. Separate lines make quotations easier to compare and reduce missing-package risk.

    Request A Quote

    Please send your project requirements and our team will provide a suitable solution as soon as possible.








    Leave a Comment

    Your email address will not be published. Required fields are marked *